Taulman Alloy 910 is meant for high-temperature, high-strength, high-durability uses. Alloy 910 is an excellent material for molding, robotics, machining or any need that requires a high tensile feature along with high durability. Due to Alloy 910’s chemical composition, it has the least water absorption of all similar materials containing a nylon component.
Description
Taulman Alloy 910 is the first 3D printable high impact, high durability co-polymer alloy with a tensile strength of 8,100 PSI, thus matching 10-15% glass filled materials.
Specifications
Print temp: 245C – 250C
Nozzle: any size
Print speed: equivalent to ABS speeds
Print bed: Glass heated to 45C with coat of PVA or Cold: BuildTak with coat of PVA
NOTE: Store nylon in an air tight container with desiccants or a de-humidifier when not in use. Make sure to dry nylon if they’ve been left in any humidity at all. All nylons will re-absorb humidity from the surrounding air within 18 hours.
Additional information
| Weight | 1 lbs |
|---|
Reviews
There are no reviews yet.