-
.50mm Advanced Thermally Conductive Nozzle for 1.75mm Filament
- Advanced thermally conductive alloy gives optimized heat transfer to filament, transfers heat with twice the efficiency of brass nozzles
- Hardened alloy reduces nozzle wear
- Long lasting - Works with any material but optimized for use with more abrasive filaments
- Specially engineered for improved lubricity and low friction
- Reduce extrusion stress and help prevent hang-ups
- High hardness for a lifetime of printing
- Reduce plastic curl during extrusion
-
.40mm Advanced Thermally Conductive Nozzle for 1.75mm Filament
- Advanced thermally conductive alloy gives optimized heat transfer to filament, transfers heat with twice the efficiency of brass nozzles
- Hardened alloy reduces nozzle wear
- Long lasting - Works with any material but optimized for use with more abrasive filaments
- Specially engineered for improved lubricity and low friction
- Reduce extrusion stress and help prevent hang-ups
- High hardness for a lifetime of printing
- Reduce plastic curl during extrusion
-
Ready for an upgrade from other free slicing software packages? Or, do you need an additional license of Simplify3D? Simplify3D is powerful 3D printing software that provides complete control over your print settings, making it easier to consistently produce high-quality 3D prints. Start up quickly with pre-configured settings optimized for Altair, review a simulation of your build sequence in the Preview Mode, and begin your 3D print with confidence. Now available at www.simplify3d.com
-
Out of stockThe X5 mini is a 32 bit ARM based Motion controller for 3D printers, CNC Machines and Laser cutters. The X5 mini runs on Smoothieware firmware and is based on Smoothieboard by the awesome Arthur Wolf. The X5 mini uses the powerful 32bit, 120Mhz NXP LPC1769 ARM chip capable of faster calculations for faster and smoother movements. • Compact and powerful all in one solution. • Board dimensions = 2" x 3.8" (51 mm x 97 mm) *The X5 Mini requires a micro SD memory card.
-
Heated Bed & Build Plate Assembly Upgrade
This is a replacement bed and heating element for all Altair 1 and Altair 2 printers. This heated bed option is ideal for printing with ABS and for reducing warp for large PLA prints. The heated bed has two parts: a silicone heating element and a a Borosilicate glass build surface (10.5" round) that provides a very durable, level surface for printing on. -
.50mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .50mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.40mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .35mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.35mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .35mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.25mm for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .25mm Orifice Diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.35mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.35mm Brass Nozzle for 1.75mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
This Borosilicate glass is for those who prefer to print directly on glass, or print with Kapton tape on glass with no heating element.
- Round 270mm
- 3mm thick
- Boro glass
- Can handle continuous use up to 500 degrees F (260 C)
- Extremely durable
- Low coefficient of thermal expansion
- Perfectly flat surface, perfect for printing
- Ground edges (No cut fingers)
-
Brass Nozzle Variety Pack includes 4 sizes: .25mm, .35mm, .40mm, .50mm
• for 1.75mm Filament • Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds.
-
Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds.
-
Low Profile Brass Nozzle for 3mm Filament Variety Pack of .25mm, .35mm, .40mm, .50mm
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
Low Profile Brass Nozzle for 1.75mm Filament Variety Pack of .25mm, .35mm, .40mm, .50mm
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
Out of stock
.35 mm FDA Stainless Nozzle for 1.75mm Filament
These .35mm wear resistant nozzles are especially recommended for use with FDA approved filaments. Universal nozzle design suitable for RepRap, Makerbot MK8, J-Head Hot End, Prusa, Mendel, and more.