-
.25mm for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .25mm Orifice Diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.35mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .35mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.40mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .35mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
.50mm Brass Nozzle for 1.75mm Filament
• Made in America! • Universal, precision machined brass nozzles for use extruding with most 3D printers • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • .50mm brass nozzle orifice diameter • M6 thread with M7 hex • Excellent for ABS, PLA, and Nylon filament • For Extruders and 3D Printers -
Out of stock
.40mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.50mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.40mm Brass Nozzle for 1.75mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.35mm Brass Nozzle for 1.75mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.50mm Brass Nozzle for 1.75mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.35mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
.25mm Brass Nozzle for 3mm Filament
• Made in America! • RepRap compatible for Makerbot MK8, J-Head Hot End, Prusa, Mendel • M6 thread with M7 hex • Excellent for ABS, PLA, HIPS, Laywood, Copper Fill, Nylon, and more • For Extruders and 3D Printers • Designed to reduce extrusion force and back pressure • Reduces jams • Stay-clean tip -
This Borosilicate glass is for those who prefer to print directly on glass, or print with Kapton tape on glass with no heating element.- Round 270mm
- 3mm thick
- Boro glass
- Can handle continuous use up to 500 degrees F (260 C)
- Extremely durable
- Low coefficient of thermal expansion
- Perfectly flat surface, perfect for printing
- Ground edges (No cut fingers)
-
Out of stock
The X5 mini is a 32 bit ARM based Motion controller for 3D printers, CNC Machines and Laser cutters. The X5 mini runs on Smoothieware firmware and is based on Smoothieboard by the awesome Arthur Wolf. The X5 mini uses the powerful 32bit, 120Mhz NXP LPC1769 ARM chip capable of faster calculations for faster and smoother movements. • Compact and powerful all in one solution. • Board dimensions = 2" x 3.8" (51 mm x 97 mm) *The X5 Mini requires a micro SD memory card. -
Out of stock
.35 mm FDA Stainless Nozzle for 1.75mm Filament
These .35mm wear resistant nozzles are especially recommended for use with FDA approved filaments. Universal nozzle design suitable for RepRap, Makerbot MK8, J-Head Hot End, Prusa, Mendel, and more. -
Altair 3 Pro has some awesome new features including a complete enclosure, flexplate for easy print removal and auto calibration. Altair 3 Pro also comes with the NOVA all-metal hot end, instant-on heated bed, and all metal frame construction.
-
.50mm Advanced Thermally Conductive Nozzle for 1.75mm Filament
- Advanced thermally conductive alloy gives optimized heat transfer to filament, transfers heat with twice the efficiency of brass nozzles
- Hardened alloy reduces nozzle wear
- Long lasting - Works with any material but optimized for use with more abrasive filaments
- Specially engineered for improved lubricity and low friction
- Reduce extrusion stress and help prevent hang-ups
- High hardness for a lifetime of printing
- Reduce plastic curl during extrusion
-
Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds. -
Large Format 3D Printer with a Large Build Volume
When projects call for big parts, professionals choose the award-winning Pro2 Plus. With high-resolution printing capabilities, full enclosure and dual extrusion, the Pro2 Plus was created to produce final-product printing quality. -
The Affordable Printer for Everyone
An easy-to-use, durable desktop 3D printer ready to improve precision standards, scale production, and add a powerful new manufacturing resource.
Call Us: 208-557-1886
